Belt conveyor
(Z-type)
Basic specifications of the separator
Capacity, t/h
from 5 to 40
Speed, m/m
to 1
Belt width, mm
from 800 to 1400
Operating temperature, 0C
from -40 to +50
Voltage power, V
380
Frequency, Hz
50
Transported material - MSW and bulk materials with the specific load to 500 kg/m3. Fractional composition of MSW - to 600 mm.
Automatics and safety system of the conveyor - Schneider Electric GmbH, Germany, JSC SPC "Teko", Russia, JSC "Sensor", Russia, Kiepe Elektrik GmbH, Germany.
Gearmotors - SEW-Eurodrive GmbH, Germany, Bonfiglioli Forever Forward, Italy and NORD Drivesystems GmbH, Germany.
Advantages
Z-type belt conveyors can have an angle of inclination to 45°.
Closed-type conveyors exclude the open access to rotating parts and reduce the injury risk.
Modular construction of the flight and other conveyor equipment allows to facilitate the installation of the conveyor significantly and to reduce logistic expences.
Conveyor systems are produced in enclosed version with the elements of the aspiration system, that allows to exclude the emission of contaminated air into production facilities.
The application of reliable automatics of the safety systems of the conveyor equipment.
The application of modern component equipment with a high degree of reliability.
Bottom idlers are equipped with special rubber rings, preventing lateral belt derailment.
Modern component equipment allows to provide soft start and braking.
Configuration
