Chain conveyor
(Z-type)
Basic specifications of the separator
Capacity, t/h
from 5 to 33
Speed, m/m
to 0,6
Apron width, mm
from 800 to 1400
Chains - hauling, roller-type, according to State Standards 588-81.
Cleaning system - brushing, with mechanical or electrical drive.
Chain wheels - driving, pulling, bypass - diameter from 100 mm to 500 mm, steel 30KHGSA.
Automatics and safety system of the conveyor - Schneider Electric GmbH, Germany, JSC SPC "Teko", Russia, JSC "Sensor", Russia, Kiepe Elektrik GmbH, Germany. Gearmotors - SEW-Eurodrive GmbH, Germany, Bonfiglioli Forever Forward, Italy and NORD Drivesystems GmbH, Germany.
Aspiration system
Advantages
Z-type conveyors can have an
angle of inclination to 45°.
Conveyors can have a different
operating apron - conveyor belt, metallic plates (track links), rubber plates
(track links).
Closed-type conveyors exclude
the open access to rotating parts and reduce the injury risk.
Modular construction of the
flight and other conveyor equipment allows to facilitate the installation of
the conveyor significantly and to reduce logistic expences.
Conveyors are produced in enclosed
version with the elements of the aspiration system, that allows to exclude the
emission of contaminated air into production facilities.
The application of reliable automatics
of the safety systems of the conveyor equipment.
The application of modern component
equipment with a high degree of reliability.
Modern component equipment allows
to provide soft start and braking.
Configuration
